• Try Us Out - See our Demo Tabs Above

    Sports Bars

    Experience our Sports Bar TV, Audio and Lighting Control System with our awesome demo! We provide multiple TV control systems that will easily integrate your Audio/Video and environmental components into one easy to use package. Let multiple hand-held remotes be a thing of the past and experience hassle free one-touch control. With the versatility of myServer 6, you may be able to retrofit existing equipment into the control system which makes it economical to get the most value out of your technology investment.

    Residential

    With a whole new exciting look and feel our transparent "Moonlight" user interface allows clarity and ease in maneuvering your lighting floor plan, climate control, security cameras, and security keypad as well as entertainment options. Control all aspects of your home with simplicity and confidence.

    Digital Signage

    Allonis makes it easy to control and launch your media content. We have created software that ties in seamlessly to your bar or restaurant control system. Upload new images and videos, discard old ones, decide what to play or post and where with just a few selections.

  • Sports Bar & Restaurant Demo

    Select a source on the left and then select the TVs you would like to change on the right.

    Along the bottom are options for a DirecTV remote, TV Guide, Audio, Favorites & AppleTV. In addition you can touch the video camera on the left hand source options to get a live preview of what's playing on that source. Be sure to click around and try everything.

    Read More

     

    Customer Listening Experience

    Pan from left to right and up and down to see all the TVs.

    Customers can select the TV closest to them to tune in to the audio.

    Read More

     

    No Floorplan Option.

    If you are not interested in a navigable floor plan we can provide a generic interface instead.

    The same features are supported.

    Read More
  • Residential Demo

    Below is our residential simulation.

    Be sure to click around and try everything. Read more about the UI below.

    Read More
  • Digital Signage

    In the large window select a player on the left. Then select an option layout on the right. Select available assets from the list provided. You can add a ticker of either a message or weather by checking the boxes. When you are finished making selections click “send to player”. Your choice will appear on the corresponding player above. To pause a video click the player once.

    Read More
  • SmartRemote Demo

    Below is our SmartRemote simulation.

    Be sure to click around and try everything. Read more about the UI below.

    Read More

Our Products

See the latest myServer 6 products, available for individual purchase or part of a custom Allonis system built especially for your project.
Software
Hardware
Sports Bars
Services

myServer 6 has a Tasmota driver that allows easy connection to devices that have the Tasmota firmware installed.

Relay Devices from Sonoff and Shelley have been tested to work well.

 

Flash the device to the Tasmota firmware (if not already)

Using a PC, find the Tasmota device in the list of Wifi Access Points.  Connect to it.

A webpage should then open to configure the Tasmota devices Wifi credentials for your Wifi network.

Once the Wifi settings are set the Tasmota device will reboot in Wifi Client mode and connect to the Access Point you defined.

If no connection is possible (wrong AP info), Tasmota will revert to it's Access Point mode to try again.

If successful in connecting to the Wifi network, you should see it's new IP address (DHCP).

Connect to the new IP address from a PC on the same network.

Go to the devices webpage (it's IP address) in a browser

Click on Configuration button, then MQTT

Set the system up like:

Tasmota mqtt config 1

 name the device in the Topic ie: tasmota/name_of_your_device

Click Save.  Device will reboot.

The myServer 6 Tasmota driver should auto discover the new device.  It will name the device as per your topic name (demopro4 in the above example).

 Device type should be "Lighting".

ADVANCED

Tasmota Rules examples

Tasmota Watchdog with Relay1 being connected to RPI reset pin. Every xx minutes have myServer set a countdown timer in the ESP32 that when expired will trigger relay to reset RPI:

 

Rule1 ON Rules#timer=1 DO Backlog power 1; delay 10; power 0 ENDON
RuleTimer1 300