1. Armcrest IP Cameras

    Accessing Amcrest Products Using RTSP Some applications or viewing tools can use Real Time Streaming Protocol or RTSP to pull a device's stream. This requires a specifically formatted URL. IP Cameras:...

    • Type: Article
    • Author: David Li
    • Category: Armcrest IP Cameras
    • Language: *
  2. iP Camera Integration

    Integration of most IP cameras for live viewing works with many available cameras. As myServer 6 displays the user interface using browser technology, the camera feed must support displaying natively in a browser. Many cameras support an mjpeg output....

    • Type: Article
    • Author: David Li
    • Category: IP Camera Integration
    • Language: *
  3. IP Camera PTZ Driver

    Port 80 or 23 Because the ONVIF protocol uses HTTP, the RTSP port and ONVIF port cannot be the same. The ports numbers depend on the camera manufacturer, go to the network setting panel of the camera and write down the RTSP port (used for rtsp://…...

    • Type: Article
    • Author: David Li
    • Category: IP Camera PTZ Driver
    • Language: *
  4. Lumens Camera Driver

    Device type should be "Security".

    • Type: Article
    • Author: David Li
    • Category: Lumens Camera Driver
    • Language: *
  5. Ubiquiti Camera Setup

    Overview This article outlines how to stream RTSP (Real Time Streaming Protocol) from a UVC camera. NOTES & REQUIREMENTS: For airCams (screenshots not shown), firmware v1.2 is required. For UVCs and UVC-G3s, firmware v3.2 or newer is required. A 3rd...

    • Type: Article
    • Author: David Li
    • Category: Ubiquity IP Camera Setup
    • Language: *
  6. Wyze Camera Integration

    RTSP settings rtsp://admin:password1@192.168.0.57:554/cam/realmonitor?channel=1&subtype=0 Device type should be "Security".

    • Type: Article
    • Author: David Li
    • Category: IPCamera Wyze Integration
    • Language: *
Results 1 - 6 of 6