1. Controlling TVs via CEC

    When using CEC, a variety of issues can be expected. First, to prevent issues, ensure that all components on both sides of the HDMI cable support CEC. On the AV source, turn on CEC in the setup menu. On the AV display, ensure you are plugged into the...

    • Type: Article
    • Author: David Li
    • Category: Controlling TVs via CEC
    • Language: *

  2. Infrared TV Control

    Setup for Infrared control of older TVs It is important to install the IR emitter to the proper location on the TV's IR "eyeball". It is also important to use an IR "mask" affixing the emitter to the TV to both ensure long lasting contact and to...

    • Type: Article
    • Author: David Li
    • Category: Generic TVIR
    • Language: *

  3. LG TV Driver

    LG produces excellent TVs for commercial usage in Sports Bars and Restaurants. myServer 6 provides easy integration into the control system for reliable control. Most new LG TVs support control via ethernet. We highly recommend you use Cat5 / 6 cable....

    • Type: Article
    • Author: David Li
    • Category: LG TV Driver
    • Language: *

  4. LG WebOS Driver

    Add the LG WebOS driver from myServer 6's Software Updater. The easiest way to add a TV to control is to enable External Control on the TV, and then click the Discovery button in the driver. You will see in the driver myServer scanning all IP addresses...

    • Type: Article
    • Author: David Li
    • Category: LGWebOS Driver
    • Language: *

  5. Peerless TV Driver

    Supports Peerless TV connection via RS232 using a GlobalCache IP to Serial hardware. Also supports myServer to Serial direct connection. Typically this would show up in Linux as /dev/ttyusb0

    • Type: Article
    • Author: David Li
    • Category: Peerless TV Driver
    • Language: *

  6. PJLink Driver

    • Type: Article
    • Author: David Li
    • Category: PJLink Driver
    • Language: *

  7. Samsung BET Driver

    Install that Samsung BET driver from myServer's Software Updater. The easiest way to add a TV to control is to enable External Control on the TV, and then click the Discovery button in the driver. You will see in the driver myServer scanning all IP...

    • Type: Article
    • Author: David Li
    • Category: Samsung BET Driver
    • Language: *

  8. Samsung Tizen TV Driver

    Samsung produces excellent TVs for commercial usage in Sports Bars and Restaurants. myServer 6 provides easy integration into the control system for reliable control. There are two drivers to covers most of the Samsung IP controlled TVs (install the...

    • Type: Article
    • Author: David Li
    • Category: Samsung Tizen TV Driver
    • Language: *

  9. Samsung TV Driver

    Samsung produces excellent TVs for commercial usage in Sports Bars and Restaurants. myServer 6 provides easy integration into the control system for reliable control. There are two drivers to covers most of the Samsung IP controlled TVs (install the...

    • Type: Article
    • Author: David Li
    • Category: Samsung TV Driver
    • Language: *

  10. Sharp TV Driver

    Install the SharpTV driver from myServer 6's Software Updater. The easiest way to add a TV to control is to enable External Control on the TV, and then click the Discovery button in the driver. You will see in the driver myServer scanning all IP...

    • Type: Article
    • Author: David Li
    • Category: Sharp TV Driver
    • Language: *

  11. Sony TV Control

    Sony produces excellent TVs for commercial usage in Sports Bars and Restaurants. myServer 6 provides easy integration into the control system for reliable control. On newer Sony Web TVs, you need to enable "Use Sony Connected Apps" Most newer Sony TVs...

    • Type: Article
    • Author: David Li
    • Category: Sony TV Driver
    • Language: *

  12. Sunbrite TV Driver

    The Veranda 3 only support Power on using WOL. Update firmware to M0711 or higher Turn on the ‘screenless’ mode in the user menu Serial/IP Control Port = OFF Control4 Control Port = ON (all API commands after WOL use this protocol) Note: Veranda 2 ,...

    • Type: Article
    • Author: David Li
    • Category: Sunbrite TV Driver
    • Language: *

  13. TCL TV Driver

    TCL TVs commonly run the Roku operating system. With the Roku driver, most of the time, myServer 6 can control the TV on / off. All Roku hardware (players, TVs) can be Discovered with the driver's Discovery function. You can also manually add it. For...

    • Type: Article
    • Author: David Li
    • Category: TCL TV Driver
    • Language: *

  14. Viewsonic TV Driver

    install the Viewsonic driver to myServer The easiest way to add a TV to control is to enable External Control on the TV, and then click the Discovery button in the driver. You will see in the driver myServer scanning all IP addresses on all active NIC...

    • Type: Article
    • Author: David Li
    • Category: Viewsonic TV Driver
    • Language: *
Results 1 - 14 of 14