myServer 6 now has ability to monitor Tire Pressure and Temperature for heavy duty truck, RVs, Autos.
So, if you are using myServer 6 to control "everything else", now you can add the additional safety and convenience of viewing TPMS related data in an intuitive and integrated user interface.
Tire Pressure, Tire Temperature, and 5 sets of Alerts are supported. Alerts include: High pressure / Low pressure, High Temperature, Excessive Leakage.
The 5 sets of Alerts can be assigned to: Steer Tires, Drive Tires, Tag Tires, Trailer or towed Car tires with seperate settings.
The myServer 6 user interface is provided to display the above in a simple manner. It is completely customizable for your exact needs using myDesigner 6 application.
myServer 6 can be programmed for "automation rules" that trigger notifications (on screen popups, email, SMS messages etc) if your conditions are met (Transceiver sent a warning message).
Your daily Check List can be automated with the TPMS data.
The system works with both TireView and TSTechnology branded TPMS hardware. These are the most popular US branded systems.
Required is the RV-C / CAN transceiver (all available from Allonis as a tested package).
Optionally available is a standalone TPMS display that connects to the tire sensors in parallel with the Transceiver if you want another way to view TPMS data. This is powered via USB. It also contains a lithium battery for unwired use (requires regular charging).
The RV-C / CAN transceiver gets wired into the vehicle's existing CAN bus. myServer 6 controller gets a "CAN HAT" to get myServer on the same CAN bus. You may also have an RF repeater (just requires power) that relays the small radio signal from the wheel sensors to the Transceiver if there is a long vehicle and / or trailer involved.
The CAN wiring is standard: Red power / Black ground / Yellow CAN High / Purple CAN Low