The Caseta driver will control all Caseta devices that are connected to the Lutron SmartHome Pro controller.
Lutron is an American lighting control company. They have several lines of home automation devices that manage light switches, dimmers, occupancy sensors, HVAC controls, etc. The
lutron_caseta integration in myServer 6 is responsible for communicating with the Lutron Caseta Smart Bridge for the Caseta product line of dimmers, switches, shades, and sensors. It will also communicate with the Lutron Radio RA2 Main Repeater for the RA2 Select product line of dimmers, switches, shades, and sensors.
This integration only supports the Caseta line of products. The Smart Bridge (L-BDG2-WH), Smart Bridge PRO (L-BDGPRO2-WH), and RA2 Select (RR-SEL-REP2-BL) models are supported. For the RadioRA 2 and HomeWorks QS product lines, see the Lutron component.
The currently supported Caseta and RA2 Select devices are:
- Wall and plug-in dimmers as lights
- Wall switches as switches
- Scenes as scenes
- Lutron shades as covers
- Lutron smart fan speed control
- Lutron Occupancy/Vacancy sensors
Additionally RA2 Select Main Repeater (
RR-SEL-REP2-BL) or Lutron Caséta Smart Bridge PRO (
L-BDGPRO2-WH) models support:
- Pico Remotes as device triggers
- Shade Remotes as device triggers
Setup the Caseta device network using Lutron's Caseta app. Ensure you can turn your devices on / off from within Lutron app on your smartphone.
user id must be: "lutron" and the password = "integration"
Go to Settings / Advanced / Integration and check the Telnet Support box. The, click "Send Integration Report". Enter your email address to send it to. Once you have received that email, copy and paste the contents of the email and put it in a file "caseta1.txt" and copy that to myServer 6's data directory.
If you have switches, fans or Lutron shades, open the Integration Report in your config directory using a text editor and find their Integration IDs and edit your myServer 6 configuration as described in the instructions below to tell it which devices are switches or shades. Unfortunately, the Integration Report does not contain this information so you need to do this manually if you have switches, fans or shades. Restart myServer 6 if you change the config file.
Download the Caseta driver from the myServer 6 Software Updater. The driver will self install.
Go to the Drivers section and select Configure for the Caseta driver.
The driver's supported commands are listed in the Commands Drop down.
enter the AddController command. Edit the command with the Lutron IP address, the room you installed it in, and a name for the controller. Click Execute Command button. You should now see the controller listed in the controller's list.
You can also add additional Lutron Controller device IP address that is connected to the Caseta device you would like to control. Note that multiple Pro hubs are supported, which means you can simply add another Pro controller (Model:L-BDGPRO2-XX) to extend your Caseta device list beyond the 50 max that are supported per hub.
The supported commands are listed in the Commands drop down list. Each command needs to be configured with the Pro hub that it is connected to.
You may find the Caseta Pro Hub might not respond to the Lutron smarthphone app as you might expect. If the device needs to be reset, Press the black button on the back of the Smart Bridge Pro 3 times, holding it for 10 seconds on the 3rd press.
After 10 seconds has passed, release the button and press it 3 more consecutive times. This is not in any official documentation, but is a method we found out through Lutron support as some of our contractors were initially having some weird issues with their Smart Bridge Pros.
Reset Network settings: press and hold the black button for 20 seconds. This will return the networking information of the Smart Bridge back to DHCP. This is useful in case a someone set the wrong Static IP on the Smart Bridge.