DSC makes popular security systems.
The DSC driver controls all of DSC security panels. Installation and configuration are easy!
The DSC driver requires the DSC IT-100 data interface which emulates a DSC keypad and exposes that data to myServer 6. If using a Raspeberry Pi, you will need a USB to RS232 adapter (one per Pi for addressing). Any DSC panel that is compatible with this hardware can be used.
Download the DSC driver from the myServer 6 Software Updater. The driver will self install.
Go to the Drivers section and select Configure for the DSC driver.
Enter the IP address of the panel to control.
The supported commands are listed in the Commands drop down list.