Ecobee thermostats are popular, cloud connected climate control devices.  myServer 6 connects to your cloud account and receives status of the thermostat and allows for remote operation.

 

Create an Ecobee online account

Login

Register your thermostat.

Install the Ecobee driver from myServer Software Updater

Go to the Ecobee Driver and click Configure

At the bottom of the driver webpage, click Authorize

You will see a 4 digit - 4 digit ID.  Copy that.

Go back to the Ecobee website.  Login.

Click on Top right on the "Hamburger Menu" (with the person icon)

Click on "My Apps" link

Click on "Create New"

ecobee_access.jpeg

Click Add Application

Enter the 4 digit - 4 digit PIN code in the field

Click "Validate"

You should then see a success message.

 ecobee_accept.jpeg

Go back to myServer ecobee driver.

Run the GetDevices command.  This will poll the Ecobee cloud with the 4 digit - 4 digit token and return all thermostats registered in the My Apps.  myServer will then create the new thermostat device.

You can test by running a thermostat command.

The default Climate webpages should display your selected thermostat temp and the buttons should be able to change temperature set points.