The Atomic IP2IR Driver supports sending IR to the Allonis IP2IR hardware.

 

To install:

Plug the Atomic IP2IR into a USB to power it up.

It will create it's own Wifi Access Point.

Using a smartphone or computer, connect to the Atomic_xx access point

From a browser, go to 192.168.200.200

A webpage will open where you can enter your Wifi access point name and password.  You can also set a static IP address or select DHCP to get an IP address you reserve on your network's DHCP server.  This IP address must not ever change.

You can bring the Atomic IP2IR back to factory default by click and HOLD on the screen until it reboots with defaults.  You can then reset the network settings on it.

Install the myServer Software Updater the Atomic IP2IR driver.

Within the driver, click on Discover.  myServer will look for any Atomic IP2IR devices and install them.  You can also manually add it via the AddDevice command.  Enter the IP address for the Atomic IP2IR hardware.

Communicates on port  24680

 

Add your IR device to be controlled in the IR Database.