Alternative IR blasters for IP2IR?

Does anyone have any suggestions on a better blaster for the IP2IR? To be clear I'm talking about the blaster not the stick on emitters. The one that came in the box has a single tiny diode and doesn't seen to work very well unless it is directly facing the device to be controlled. This is challenging with my AV rack and for a variety of reasons stick on emitters are going to be a problem.

I've looked on the GlobalCache community forum but all of the posts I can find regarding this are at least a decade old and most of the suggestions aren't even available anymore. I do have some 2.5mm to 3.5mm mono adapters on the way so I can experiment with the Harmony Hub blasters but am curious if anyone can recommend any other blasters I should be considering.

Disregard the previous post. I hadn't saved my configuration correctly for port 3 in the IP2IR interface so it was only getting a limited amount of power. Properly putting that port in blaster mode has made it work much more reliably.