myServer Advanced Presets

Introduction:

Advanced Presets is an optional myServer addon that gives the user the ablility to create snapshots of their environment and save them as named presets. These presets can then be restored on demand or at timed intervals when used with the optional myServer Task Scheduler addon.

There are three different classes of presets Audio, Video, and Lighting.

There is no limit to the number of presets a user can define.

Presets can be created for the entire home or venue, or an area like a room.

There is no configuration needed. The server will automatically find all the appropriate devices based on the type of preset, device types and device location.

This is aimed at commercial installations but can also be used in residential installs. 

Here is a list of what the presets will record.

Preset Logic:

 Video presets:

When created a video preset will perform the following actions:

                        Save the stations all Cable or DirecTV boxes are tuned to.

                        Save the state of all the TVs in the affected area (power and active input, volume and mute).

                        Save the source each TV is currently watching.

When a video preset is restored, it will:

                        Tune all the Cable and DirecTV boxes to the saved channels.

                        Make sure all the TVs are in the correct state (power and active input).

                        Switch all the TVs to the appropriate video source.

Audio presets:

When created or updated and audio presets perform the following actions:

            Save the source each audio zone is playing.

            Save the volume and mute state of each output zone.

If the system implements audio mixers it will record the active mixer channels for each audio zone and the source volume for each of the mixer channels.

When an audio preset is restored, it will:

                        Restore each audio zone to the appropriate source.

                        Restore the volume and mute state of each output zone.

                        Restore the mixer state of each mixer channel in the zone.

Lighting presets:

When created or updated these presets will:

                        Save the state of each lighting device in the affected area.

Eligible devices are switches, dimmers, and DMX device channels for supported colors.

             When a lighting preset is restored, it will:

                        Return each of the lights in the affected area back to its previously defined state.

On/Off, brightness and color.

Once the preset snapshot has been taken the system will automatically create a macro by the name name of the preset. Once the preset exists as a macro it can then be recalled on demand or on schedule. The user also has the ability to edit the macro to make any adjustments rather than having to redo the preset from scratch.

Preset Usage:

When no preset exists for a given area the system will automatically create a preset for the user using the naming convention  “AREA NAME Beginning of Day”, e.g. "Main Dining Beginning of Day”. The assumption being that this is the most common starting task for a preset.

Users are free to change the name of the preset. Delete it and create their own.

he universal navigator icon for calling up the presets is preset nav . To dismiss the preset popup just click on the navigator button a second time.

Later on, you will see how common presets like “Beginning of Day” and “End of Day” can be easily grouped together using the task scheduler. One simple command to execute the preset called “Beginning of Day” will restore ALL the “Beginning of Day” presets for all preset types in all preset areas.

Audio Presets:

Audio presets are defined for the entire location and are not broken up by area. This is because the user interface for audio is designed to display the audio settings for all areas on a single page.

Creating an Audio Preset:

The first step to create, or modify, an Audio preset is to set every zone’s volume slider to the desired listening source and volume. Repeat for ALL zones. One new feature that you will notice is that the relative volume of every zone is now displayed on the slider thumb. Additionally, volume will now change as you adjust the slider in real time. Previously you had to release the slider in order to hear the volume change.

Once you have made all the adjustments you are ready to set the preset. First click on the presets button on the bottom navigation bar. This will display the preset popup overlay, Figure 3.

 audio preset 1

Figure 3

audio preset 2

Notice that the preset already have been created. Make sure all the settings are correct. If the current audio settings match the conditions for one of these presets all you have to do is click on the Save button and you’re done. From this point on anytime you click on the Restore button for the named preset your audio settings will automatically be restored.

If you would like to create a new preset then click on the green + button. This will bring up a keyboard overlay for naming the new preset.

audio preset 3

Now use the keypad buttons to set your new name. You can click the eraser button, left of Z, to clear the name currently shown.

 audio preset 4

Once you are satisfied with the new name Click on the save button, right of space bar. Or if you do not want to save anything and cancel, just click on the Circle-X button on the upper right corner.

Newly saved presets will automatically appear in the list of Audio presets.

audio preset 5 

If you would like to rename an existing preset just click on the blue edit button. This will bring up the popup keyboard and allow you to change th

If you no longer want this preset then you can click on the red delete button next to the preset and then confirm the deletion on the confirmation dialog button

Audio Presets Summary:

  • The presets named “AREA NAME Beginning of Day” are automatically created for you. They are considered system presets.
  • Set the area into the mode that you want for the preset.
  • Create the preset if it does not exist.
  • Press the Save button.
  • When you want it back press the Restore button.

Video Presets:

Video presets, like the Audio ones, can be defined each of the TV areas or as a whole for the entire establishment

 video preset 1

To create Video presets first select the TV Area of interest.

Start by setting each of the TVs in the area to the desired video source. Also, if the source is a Cable or DirecTV box make sure to set the channel the TVs should be watching if they are not already tuned to the correct station.

Now click on the preset button on the bottom navigation bar. The presets popup will appear, Figure 11.

You have the familiar “AREA NAME Beginning of Day” default presets and also the ability to create a new preset. You should also note that the area name on the top of the preset popup is now showing the active TV area along with the fact that you are creating Video presets.

Having Video presets defined by viewing area allows for the greatest amount of flexibility.

 Video Presets Summary:

  • The presets named “AREA NAME Beginning of Day” are automatically created for you. They are considered system presets.
  • Video presets are broken out by TV Areas.
  • Set the area into the mode that you want for the preset.
  • Create the preset if it does not exist.
  • Press the Save button.
  • When you want it back press the Restore button.

Lighting Presets:

Lighting presets are broken out by areas and groups. This follows how the application lays out the lighting controls.

Clicking on the Lighting button from the application’s home page, Figure 1, will display the Lighting control section of the application. For this document we will select the Bowling Seating lighting area. Everything that follows is applicable for all other Lighting areas

Defining a Lighting preset involves first setting each light in the selected group to the desired color level and brightness. Once all the individual lights in the group have been set you can then click on the presets navigator button to set the preset.

Again, we have the default “LIGHTING ARE Beginning of Day” along with the ability to create a new preset. You should also note that the area name on the top of the preset popup is now showing the active Lighting area along with the fact that you are creating Lighting presets.

Repeat this process for each of the defined lighting groups. While this might seem cumbersome at first having Lighting presets defined with this level of granularity allows for the greatest amount of flexibility.

 Lighting Presets Summary:

  • The presets named “Beginning of Day” are automatically created for you. They are considered system presets.
  • Lighting presets are broken out by Lighting groups.
  • Set the group into the mode that you want for the preset.
  • Create the preset if it does not exist.
  • Press the Save button.
  • When you want it back press the Restore button.

Once you have created Presets, you might now want to invoke those presets using myServer 6 Task Scheduler

You can also manage the myServer 6 controller using myServer 6 System Management Options

Learn about myServer's optional myDigitalSignage